C- Inverter/Charger/Solar 5kW 48V 80A solar charger
or 6 weekly payments from $316.67 learn more
UPower-Hi series, an upgrade hybrid inverter charger that supports utility charging, oil
generator charging, solar charging, utility output, inverter output, and energy management. To maximize solar energy utilization, users can choose energy sources according
to actual needs and flexibly take the utility as a supplement in the hybrid system. This
inverter charger provides high-quality, high-stability, and high-reliability electric energy to
the users by improving the solar system's power supply efficiency
Supports the battery mode or non-battery mode.
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously.
Surge and reverse connection protections to support the lithium battery system perfectly.
Three charging modes: Solar only, Solar priority, Utility & Solar.
Two AC output modes: Utility priority and Inverter priority.
High tracking efficiency of MPPT no less than 99.5%.
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage.
Advanced SPWM technology and pure sine wave output.
Customized charging current and discharging limited current.
SOC with the self-learning feature is visible on LCD.
4.2 inch LCD to monitor and modify system parameters.
Optional WiFi or GPRS Remote control by the RS485 isolated communication port.
Optional BMS-Link port, which takes the charging and discharging control from BMS
Nominal battery voltage = 48VDC
Battery input range = 43.2 ~ 64VDC
Continuous output power = 5000W
Max. surge power = 8000W 5 seconds
Output voltage range = 230VAC (-10% ~ +3%)
Output frequency = 50+/-0.1 Hz
Output mode = Single phase
Output wave = Pure Sine Wave
Max efficiency = 93%
Transfer time = 0 ~ 10ms
Utility input voltage range = 160VAC ~ 280VAC (working voltage range) / 170VAC ~ 270VAC (Untility starting voltage range)
Max. Utility charge current = 60A
Max. PV open circuit voltage = 500V MPT tracking 120 to 400V , minimum volts DC 120
Max. PV input power = 4000W
Max. PV charging current = 80A
Gel, AGM, Flooded , Lithium and user programable
Tracking efficiency = <99.5%
Max. charging conversion efficiency = 98%
Zero load consumption = <1.2A
Enclosure = IP30
Relative humidity = <95% (N.C.)
Working environment temperature = -20C ~ 50C (full input and output with no derating)
Dimensions = 643mm x 382mm x 149mm
Mounting hole size = 10mm
Net weight = 19kg